KHT-5GOA1 / KHT-5GOA2
KHT-5GORA1 / KHT-5GORA2
KHT-5GD12 / KHT-5GD24
Specification:
| Item/Model |
KHT-5GOA1 KHT-5GOA2 |
KHT-5GORA1 KHT-5GORA2 |
KHT-5GD12 KHT-5GD24 |
| Voltage | A1: AC110V~130V 50/60Hz A2: AC220V~240V 50/60Hz D12: DC12V D24: DC24V | ||
| Oxygen flow | 1L/Min | 3L/Min | 5L/Min |
|
Ozone concentration based on oxygen feeding |
65Mg/L | 43Mg/L | 30Mg/L |
|
Ozone output based on oxygen feeding |
3.9G/H | 7.7G/H | 9.0G/H |
| Power | 80W | 80W | 60W |
| Output high voltage | 2.5~3.5KV 16KHz | 2.5~3.5KV 16KHz | 3.5~4.0KV 12KHz |
|
Ozone output adjustable range |
/ | 20%~100% | 20%~100% |
| Transformer |
hort circuit protection, Open ciruit protection, Overcurrent protection, Overvoltage protection, Overheat protection |
Short circuit protection, Open ciruit protection, Overcurrent protection, Overvoltage protection, Overheat protection, using IGBT drive chip control, working more stable and reliable |
Short circuit protection, Open ciruit protection, Overcurrent protection, Overvoltage protection, Overheat protection |
| Cooling method | Air cooling for internal and external electrode | ||
| Test conditions |
1. Using the ultraviolet absorption method to test the ozone output and concentration. 2. Oxygen purity: >95%, Dew point: >-45℃. 3. Ambient temperature: ≤10℃, Humidity: <10% (Different temperature and humidity in the environment will affect the ozone output and concentration.) |
||
Features:
1. Narrow discharge gap, high ozone output and concentration, low noise.
2. High-voltage and high-frequency corona discharge, small size transformer, low consumption rate of electricity.
3. The ceramic tubes are with low working voltage but high dielectric constant, not easy to be breakdown.
4. Dielectric materials are made by imported high purity aluminum oxide that are sintered through high temperature, two times high-precision internal and external burnish, thus discharge uniformity. Besides, 316L stainless steel internal electrodes and tightness firmwares make its performance better. The end caps of ozone tube and ozone outlets are made of polytetrafluoroethylene, high-purity corrosion resistant fluorine rubber seal rings, with aluminum alloy external radiator, an very effective way to heat radiation.
5. Ozone decrease is lower than 5% if work for a long time, while life time is more than 20,000 hours.
6. Easy to maintain and install.